Search found 12 matches

by ajaymm58
Sun Sep 29, 2019 7:34 pm
Forum: ESP-IDF
Topic: ESP-IDF v3.3 LTS clarification
Replies: 7
Views: 7721

Re: ESP-IDF v3.3 LTS clarification

WRT: use esp-idf-tools-setup-1.2.exe, over esp-idf-tools-setup-2.0.exe I would also like to understand if ". . .2.0.exe" can be used for building esp-idf v3.3 or not. Else, considering v3.3 is LTS but CMAKE toolchain is "preview" only; is there a plan to support v3.3 and v4.x with the same version ...
by ajaymm58
Mon Apr 10, 2017 9:19 pm
Forum: General Discussion
Topic: Does Espressif burns unique MAC address in eFuse for every ESP32 device?
Replies: 0
Views: 4115

Does Espressif burns unique MAC address in eFuse for every ESP32 device?

Seeking confirmation on the following items: (else otherwise) 1. Each ESP32 device* has WIFI_MAC_Address (56-bits=48-bit MAC Address + 8-bit CRC) uniquely programmed at factory. (*not the module, the IC itself) 2. For MAC address in eFuse "24:0A:C4:HH:MM:LL" total of four MAC addresses ":LL", ":LL+1...
by ajaymm58
Thu Apr 06, 2017 12:52 am
Forum: Hardware
Topic: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26
Replies: 32
Views: 54421

Re: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26

preview - not confirmed - wait for confirm
How long of a wait ? Need this info to finalize PCB design
by ajaymm58
Tue Mar 28, 2017 1:04 am
Forum: Hardware
Topic: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26
Replies: 32
Views: 54421

Re: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26

iosixllc wrote:I'm sorry, the SAME?! Exactly?
Yes, EXACTLY SAME
by ajaymm58
Mon Mar 27, 2017 5:35 pm
Forum: Hardware
Topic: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26
Replies: 32
Views: 54421

Re: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26

I have noticed following differences in pin assignments between the 6mm x 6mm QFN48 and 5mm x 5mm QFN48. Referring to ESP32 Datasheet V1.2 Fig 2 on pp 6 and Fig 3 pp 7. So it will be useful to get confirmation on these items. It would be much better if section 2.2 "Table 1 : Pin Description" is upd...
by ajaymm58
Fri Mar 24, 2017 8:48 pm
Forum: Hardware
Topic: WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting
Replies: 5
Views: 10912

Re: WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting

Yes, it is a known issue. The boot code in the ROM of the ESP32 isn't directly compatible with the specific instructions the flash chip needs to use QIO mode. We are working on a workaround, expected to get into esp-idf in the coming weeks, but for now, QIO mode does not work here. Is there any upd...
by ajaymm58
Fri Mar 24, 2017 8:39 pm
Forum: Hardware
Topic: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26
Replies: 32
Views: 54421

Re: ESP32 Pin Layout (for QFN 5*5), Pin25, Pin26

I have noticed following differences in pin assignments between the 6mm x 6mm QFN48 and 5mm x 5mm QFN48. Referring to ESP32 Datasheet V1.2 Fig 2 on pp 6 and Fig 3 pp 7. So it will be useful to get confirmation on these items. It would be much better if section 2.2 "Table 1 : Pin Description" is upda...
by ajaymm58
Thu Jan 19, 2017 1:25 am
Forum: Hardware
Topic: WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting
Replies: 5
Views: 10912

Re: WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting

Thanks for the confirmation regarding QIO mode support. 1. Is DIO @80MHz tested on DevKitC (ESP-WROOM-32)? 2. Can you kindly list the target device families from GigaDevice and Winbond for which QIO mode will be supported? 3. For the planned feature support on this matter, will SPI Flash devices wit...
by ajaymm58
Wed Jan 18, 2017 2:35 am
Forum: Hardware
Topic: WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting
Replies: 5
Views: 10912

WROOM-32 (DevKitC) QIO/40MHz operation keeps resetting

I tried to configure QIO/40MHz operation (using menuconfig), and I see the following on UART0-console: ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) flash read err, 1000 Falling back to built-in command interpreter. OK >ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_R...
by ajaymm58
Sat Jan 14, 2017 8:58 pm
Forum: ESP-IDF
Topic: Issue with the esp-idf/make/project.mk
Replies: 1
Views: 4893

Issue with the esp-idf/make/project.mk

With the latest SDK and tools, I noticed the following issue: At Line #432 and #433, the toolchain version verification returns a null string. TOOLCHAIN_COMMIT_DESC := $(shell $(CC) --version | sed -E -n 's|xtensa-esp32-elf-gcc\ \(([^)]*).*|\1|gp') TOOLCHAIN_GCC_VER := $(shell $(CC) --version | sed ...