The address is also incorrect.
The value will be more close to 0x120000 or 0x130000, but its not the exact number i think.
Factory app partition most likely will be at 0x10000, so it should be 0x120000.
In your case it would be best if you configure factory partition start address.
Search found 2237 matches
- Wed Apr 24, 2024 1:14 am
- Forum: ESP-IDF
- Topic: Failure to load firmware on ESP32C6
- Replies: 2
- Views: 140
- Wed Apr 24, 2024 1:05 am
- Forum: ESP-IDF
- Topic: component.mk vs CMakeLists.txt
- Replies: 1
- Views: 101
Re: component.mk vs CMakeLists.txt
.mk file is used with make build, which is deprecated, and cmakelists is used for cmake build tools
- Wed Apr 24, 2024 1:03 am
- Forum: ESP IoT Solution
- Topic: ESP32 BLE OTA Mobile App ?
- Replies: 1
- Views: 75
Re: ESP32 BLE OTA Mobile App ?
I think this app may be compatible with esp-idf OTA over BLE example, but im not sure
https://github.com/EspressifApp/EspMesh ... Apis_en.md
https://github.com/EspressifApp/EspMesh ... Apis_en.md
- Wed Apr 24, 2024 12:57 am
- Forum: ESP-IDF
- Topic: IDF example scan does not show ap's returned
- Replies: 3
- Views: 165
Re: IDF example scan does not show ap's returned
I dont know the example code, but this function return the correct value after wifi scan is finished, so either the API finish and event is received or you call scan stop before call this
Code: Select all
esp_wifi_scan_get_ap_num
- Wed Apr 24, 2024 12:38 am
- Forum: Hardware
- Topic: "Sleep" mode in which IRAM and cache are preserved
- Replies: 7
- Views: 399
Re: "Sleep" mode in which IRAM and cache are preserved
Im not sure what you are trying to do, but did you try to use light sleep mode?
It will stop executing code on CPU/s, which will decrease a bit power consumption, and will keep all data in RAM.
All you need to stop wifi before enter light sleep mode to turn off radio.
It will stop executing code on CPU/s, which will decrease a bit power consumption, and will keep all data in RAM.
All you need to stop wifi before enter light sleep mode to turn off radio.
- Wed Apr 24, 2024 12:35 am
- Forum: ESP-IDF
- Topic: Help: NimBLE Characteristics Properties (Flags) Aren't Properly Applying From ble_gatt_svc_def
- Replies: 2
- Views: 445
Re: Help: NimBLE Characteristics Properties (Flags) Aren't Properly Applying From ble_gatt_svc_def
Yes, it is not obvious but its annoying during development until you learn it hard way. Another option is to use "forget LE device" on iPhone. Its somewhere in there, but honestly i dont know where. You can also try to connect with nrf connect and use option to refresh services with "discover servic...
- Wed Apr 24, 2024 12:19 am
- Forum: ESP-IDF
- Topic: HTTP Client: What happens if the server response is too large?
- Replies: 3
- Views: 258
Re: HTTP Client: What happens if the server response is too large?
Ok.. once again, after having searched a while, I find the obvious answer just after having written the post here. Hoping that it might nonetheless spare someone else some time, I do not delete my question and post the simple answer: The esp_http_client_config_t has a buffer_size attribute (that de...
- Tue Apr 16, 2024 6:14 pm
- Forum: ESP-IDF
- Topic: Cannot connect to WIFI
- Replies: 2
- Views: 240
Re: Cannot connect to WIFI
What is this value
Code: Select all
WIFI_ESP_CONN_TIMEOUT
- Tue Apr 16, 2024 6:06 pm
- Forum: ESP-IDF
- Topic: bogus sdkconfig changes
- Replies: 4
- Views: 360
Re: bogus sdkconfig changes
This is not a problem with line endings or similar problems. Obviously something is enabling and/or disabling some options in Kconfig. Do you have some extra build scripts? Maybe rebuild with set-target is doing this? Its rather not possible, but different targets may have different default sdkconfi...
- Mon Apr 15, 2024 2:23 am
- Forum: ESP-IDF
- Topic: Publishing Messages in Mesh Network
- Replies: 5
- Views: 1993
Re: Publishing Messages in Mesh Network
Hi, its not that i dont want to help you, but i believe it will be faster and with better results to you when you start from scratch. - grab espressif example - in custom callback (esp_ble_mesh_register_custom_model_callback) just print logs for event and opcode to see what you are receiving and to ...