External antenna

rahmaevao
Posts: 11
Joined: Fri Oct 06, 2017 8:59 am

External antenna

Postby rahmaevao » Thu Oct 25, 2018 8:40 am

I bought an antenna 2042811100 MOLEX. https://www.molex.com/molex/products/da ... TENNAS.xml
Image
But it does not stick into the slot on module ESP32-WROOM-32U.

Image
What kind of antennas do you use in your projects?

User avatar
loboris
Posts: 514
Joined: Wed Dec 21, 2016 7:40 pm

Re: External antenna

Postby loboris » Thu Oct 25, 2018 8:58 am

This antenna has a MHF4 connector and ESP32 modules have IPEX connectors.
What is the difference between u.fl. / IPEX / MHF4?
QUESTION
What is the difference between u.fl. / IPEX / MHF4?

SOLUTION
u.fl and IPEX are all different names for the same contact. So you can use these names interchangeably.

MHF4 is the smaller contact used with m.2/NGFF modules.
https://techship.com/faq/what-is-the-di ... ipex-mhf4/

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: External antenna

Postby WiFive » Thu Oct 25, 2018 10:56 am

Technically MHF4 is part of the same family as "IPEX" which is really MHF or MHF1 made by I-PEX

rahmaevao
Posts: 11
Joined: Fri Oct 06, 2017 8:59 am

Re: External antenna

Postby rahmaevao » Thu Nov 01, 2018 7:31 am

Thank you all! :D
Image
But in the specification for the antenna indicated that it is a ufl connector.
Where is the truth?
What kind of antennas do you use?
Drawing ufl connector from ESP32https://www.espressif.com/sites/default ... eet_en.pdf:
Image
Drawing ufl connector for antenna connections (MOLEX recommendation):
https://yadi.sk/i/PaUMuhI3zNwNFQ
Image
They're alike :shock:
What kind of antennas do you use?
I bought this antenna here. Is it suitable?
https://ru.farnell.com/arduino/x000016/ ... dp/2830995
Image

User avatar
loboris
Posts: 514
Joined: Wed Dec 21, 2016 7:40 pm

Re: External antenna

Postby loboris » Thu Nov 01, 2018 11:53 am

rahmaevao wrote:I bought this antenna here. Is it suitable?
https://ru.farnell.com/arduino/x000016/ ... dp/2830995
Image
You need a wifi antenna, 2.4GHz, with U.FL (IPEX) connector.
The antenna you've bought is designed for Arduino MKR1200 and it is a Sigfox antenna for 868MHz.
It may work, but not good.

WiFi antennas on eBay

rahmaevao
Posts: 11
Joined: Fri Oct 06, 2017 8:59 am

Re: External antenna

Postby rahmaevao » Thu Nov 01, 2018 12:40 pm

Are there specific models that you use?

User avatar
loboris
Posts: 514
Joined: Wed Dec 21, 2016 7:40 pm

Re: External antenna

Postby loboris » Thu Nov 01, 2018 7:27 pm

Choosing the wifi antenna depends on the intended usage.
If you just need to connect to the wifi router in your home, any wifi antenna will probably work good.

If you have trouble choosing the antenna, I would recommend next time you buy the ESP32 module with the PCB antenna.

Who is online

Users browsing this forum: No registered users and 57 guests