GPIO Interrupts (Advice please)

papafritus
Posts: 2
Joined: Fri May 10, 2019 12:44 pm

GPIO Interrupts (Advice please)

Postby papafritus » Sun May 19, 2019 5:39 am

Hi all,
I'm working with GPIO Interrupts (its my first time) and I really need advice on my code.
The thing is simple: To detect a push button with an interrupt.
The code set the interrupt and when detect the button pressed, disable the interrupt for a time.

Its ok? Is there a better way to do it? Is there a good place to read about it?

Thanks in advance!

Code: Select all

#include <stdio.h>
#include "esp_timer.h"
#include "driver/gpio.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"

#define BLINK_LED      32  //Just a led blinking
#define BUTTON_LED_1   25  //This Led light for a second when button is pressed
#define PUSH_BUTTON_1  27

#define ESP_INTR_FLAG_DEFAULT 0

static int b_presionado_1 = 0;  //a flag: 1 = button pressed, 0 = button released
static int b_letInt_1 = 0;      //a flag: 0 = dont let the interrupt happen, 1 = let it

void triggered_1_isr(void* instance)
	{
	b_presionado_1 = 1;
	b_letInt_1 = 0;
	gpio_intr_disable(BUTTON_LED_1);
	}

void app_main(void)
	{
	unsigned long tiempo;
	unsigned long temporizador_1;
	unsigned long temporizador_2;
	int estadoLed;

	gpio_pad_select_gpio(BLINK_LED);
	gpio_set_direction(BLINK_LED, GPIO_MODE_OUTPUT);

	gpio_pad_select_gpio(BUTTON_LED_1);
	gpio_set_direction(BUTTON_LED_1, GPIO_MODE_OUTPUT);

	gpio_pad_select_gpio(PUSH_BUTTON_1);
	gpio_set_direction(PUSH_BUTTON_1, GPIO_MODE_INPUT);
	gpio_pullup_en(PUSH_BUTTON_1);
	gpio_pulldown_dis(PUSH_BUTTON_1);
	gpio_set_intr_type(PUSH_BUTTON_1, GPIO_INTR_NEGEDGE);

	gpio_install_isr_service(ESP_INTR_FLAG_DEFAULT);

	gpio_isr_handler_add(PUSH_BUTTON_1, triggered_1_isr, (void*) PUSH_BUTTON_1);
	gpio_intr_enable(PUSH_BUTTON_1);
	b_letInt_1 = 1;


	tiempo = esp_timer_get_time();
	temporizador_1 = esp_timer_get_time();
	gpio_set_level(BLINK_LED, 1);

	estadoLed = 0;
    while (true)
		{
    	//-------------------------- Keep a led blinking every 0,5s ---------------------------
		if(esp_timer_get_time() - tiempo > 500000 && estadoLed == 0)
			{
			tiempo = esp_timer_get_time();
			gpio_set_level(BLINK_LED, 0);

			estadoLed = 1;
			}

		if(esp_timer_get_time() - tiempo > 500000 && estadoLed == 1)
			{
			tiempo = esp_timer_get_time();
			gpio_set_level(BLINK_LED, 1);

			estadoLed = 0;
			}
		//--------------------------------------------------------------------------------------

		//If button is press light a led and start a timer
		if(b_presionado_1)
			{
			temporizador_1 = esp_timer_get_time();
			b_presionado_1 = 0;
			gpio_set_level(BUTTON_LED_1, 0);
			}

		//Check the timer for the button led. If greater than 1s, then lights off and let new interrupts
		if(!b_letInt_1)
			{
			if(esp_timer_get_time() - temporizador_1 > 1000000)
				{
				gpio_set_level(BUTTON_LED_1, 1);
				b_letInt_1 = 1;
				gpio_intr_enable(PUSH_BUTTON_1);
				}
			}

		}
	}
	

WiFive
Posts: 3529
Joined: Tue Dec 01, 2015 7:35 am

Re: GPIO Interrupts (Advice please)

Postby WiFive » Mon May 20, 2019 9:28 am

You shouldn't have blocking infinite loops in rtos tasks. Either insert vtaskdelay or use a timer callback.

Who is online

Users browsing this forum: awegel and 137 guests