Technical Parameters of ESP-WROOM-32

Sai Teja
Posts: 3
Joined: Mon Feb 05, 2018 6:38 am

Technical Parameters of ESP-WROOM-32

Postby Sai Teja » Tue Nov 13, 2018 1:37 pm

Hi, I are using ESP-WROOM-32 in an application. Please provide the following details regarding ble transmission of ESP-WROOM-32.

1) modulation bandwidth ,
2) frequency channels and
3) data rate.
4) Tx Power

Can we change above parameters programatically? If yes, please tell how to change these values? If no, please tell what are the default values of the parameters?

I am using Arduino Core for ESP-32 for programming.

We need the information quickly, please respond as soon as possible.

Awaiting your reply.

tommeyers
Posts: 184
Joined: Tue Apr 17, 2018 1:51 pm
Location: Santiago, Dominican Republic

Re: Technical Parameters of ESP-WROOM-32

Postby tommeyers » Tue Nov 13, 2018 2:33 pm

I think *you* need to do some work; begin to reading the technical specifications!

Then post again when you have done that; and post a list of what you have read and if any questions still remain this is a good place to ask for help.

Tom Meyers
IT Professional, Maker
Santiago, Dominican Republic

ESP_Lvxinyue
Posts: 51
Joined: Fri Dec 25, 2015 6:13 am

Re: Technical Parameters of ESP-WROOM-32

Postby ESP_Lvxinyue » Wed Nov 14, 2018 11:36 am

Sai Teja wrote:
Tue Nov 13, 2018 1:37 pm
Hi, I are using ESP-WROOM-32 in an application. Please provide the following details regarding ble transmission of ESP-WROOM-32.

1) modulation bandwidth ,
2) frequency channels and
3) data rate.
4) Tx Power

Can we change above parameters programatically? If yes, please tell how to change these values? If no, please tell what are the default values of the parameters?

I am using Arduino Core for ESP-32 for programming.

We need the information quickly, please respond as soon as possible.

Awaiting your reply.
Hi,

For "frequency channels", if you mean changing the channel when ESP32 is advertising, please try to call this function.
TX power can be set by calling this function.
The other two parameters are given by the Bluetooth spec and cannot be changed.
Let me know if you have further questions. Thanks.

Sai Teja
Posts: 3
Joined: Mon Feb 05, 2018 6:38 am

Re: Technical Parameters of ESP-WROOM-32

Postby Sai Teja » Thu Nov 15, 2018 2:47 pm

Hi ESP_Lvxinyue,

Thank for your information.

Please tell the default values of modulation bandwidth and datarate.

And regarding frequency channel , you referred function related to starting ble advertisement. I would like to know frequency channel for ble transmission.

Awaiting your reply.

Who is online

Users browsing this forum: No registered users and 49 guests