Dev Kit C without the external pins

anakyr
Posts: 22
Joined: Fri Jun 15, 2018 12:09 pm

Dev Kit C without the external pins

Postby anakyr » Fri Oct 05, 2018 8:25 am

Hi,

I would like to mount ESP32-DevKitC-32D on a fixture to test vibration.
Is there any ESP32-DevKitC-32D on the market without the long pins around it?
Meaning the ones in the picture attached.
Those pins don't allow me to mount my board on the fixture as wished.
Attachments
Inked142687940_LI.jpg
Inked142687940_LI.jpg (914.68 KiB) Viewed 4997 times

Archibald
Posts: 110
Joined: Mon Mar 05, 2018 12:44 am

Re: Dev Kit C without the external pins

Postby Archibald » Fri Oct 05, 2018 10:53 am

I have removed similar header pins from an Arduino one at a time using a soldering iron. The plastic melts sufficiently. I was holding the Arduino in a small vice along its sides and pulling each pin out with pliers.

Alternatively, shorten the pins using side (diagonal) cutters.


Who is online

Users browsing this forum: No registered users and 124 guests